HIGH LIFT
The Bendi B40AC-HL and B50AC-HL forklifts work in aisles as narrow as 78″ (1.98M)*, have a starting capacity of 4,400 lbs (1996 kg) at 24″ (600mm) load center and lift heights available to 41′ (12.50M).
They are a 4-wheel articulating forklift with dual independently driven rear-drive tires and soft-poly front load tires. The Bendi B40AC-HL and B50AC-HL can work inside and outside on paved surfaces and have a floating front axle allowing the trucks to ride smoothly over uneven floors. They can do the same jobs as reach and counterbalanced trucks but in much narrower aisles.
* Based on 48” (1200mm) long x 40” (1000mm) wide load.
EXCEPTIONAL PERFORMANCE AND MANEUVERABILITY
Equipped with the Landoll DuraSteerTM front wheel hydraulic steering, the B40AC-HL/B50AC-HL provides exceptional control and makes load placement and retrieval superior to the competition.
3-STAGE MAST
The new mast has a rigid mounting and as standard a tilting and side shifting carriage. The new design offers increased mast rigidity, capacity and improved visibility. Dual free lift cylinders and optimized hose and chain routings have improved visibility thru the mast. Lowered heights have been reduced and a new mounting position on the 42” (1067 mm) wide front axle reduces the distance from the face of the forks to the back of the axle thereby improving aisle performance. Mountings for cameras have been integrated into the inner mast and an optional integral side shifting fork positioner combination is also available.
FEATURES
- 4,400 lb. (1,996kg) and 5,000 lb. (2,268kg) Capacity at 24″ (600mm) Load Center
- Four-Wheel Design, Dual Rear Wheel Drive
- Adjustable Seat and Steering Wheel
- Integral 11.2″ (285mm) Stroke Sideshifter and 36″ (914mm) High Load Backrest
- DuraSteerTM Front Wheel Hydraulic Steering Provides Smooth, Reliable, Long-Lasting Steering Control
- Creep Speed Mode Adds Enhanced Control when Handling Loads at High Elevations or While Training Operators
- High Visibility Mast Allows Optimum Safety and Control
- Independently Controlled Rear Wheels Allow Independent Speed Control of Each Drive Tire Based on Steering Angle
- AC Traction and Hydraulic Motors Ensure Minimal Maintenance and High Efficiency
- High-Efficiency Curtis AC Controllers Provide Trouble Free Operation
- Interactive LCD Status Monitor (BDI with Lift Interrupt, Hour Meter with Service Monitor, Diagnostic Code Display, Input Device Calibration)
- 48 Volt Electrical System
- Optional Cold Storage Conditioned to -22°F (-30°C)
OPTIONS
- Non-Standard Fork Lengths
- Dual Overhead Guard-Mounted LED Headlights
- Dual Rear Safety LED Light Bars
- Backup Alarm – Beeping Tone (“Smart” dB Adjusting)
- Safety Flashing LED Light
- Blue Pedestrian Warning Spotlights
- Fire Extinguisher – OHG Post Mounted
- Roller / Slide-Out Battery Tray
- Lazer Fork Height Indicator
- Hydraulic Integral Fork Positioner
- Hydraulic Fork Extensions
- Camera with Monitor in Operator’s Compartment
- Cold Storage Conditioned to -22°F (-30°C)
SPECIFICATIONS
- 4,400 lb. (1,996kg) and 5,000 lb. (2,268kg) Capacity at 24” (600mm) Load Center
- Lift Heights to 492” (12.5M)
- Four-Wheel Design, Dual Rear Wheel Drive
- High Visibility 3-Stage Mast
- Integral 11.2” (285mm) Stroke Side Shifter and 36” (914mm) High Load Backrest
- Adjustable Seat and Steering Wheel
- Dual Curtis AC Traction Motor Controllers
- Curtis AC Hydraulic Motor Controller
- Battery Discharge Indicator with Lift Interrupt
- Electronic Regenerative and Hydraulic Disc Braking
- “Floating” Articulated Front Axle
- 180º Front-End DuraSteer™ Articulation / Steering Assembly with 5-Year Warranty
- Safety Seat Switch, Seat Belt and Rear View Mirror
- Curtis Engage Dash Display
- Hand Actuated Parking Brake
- Non-Tilting Rigid Mounted Mast
- Carriage Tilt 0º Forward / 3º Backward
- Smooth Rubber Drive Tires
- Soft Polyurethane Load Wheel Tires
- 40” (1,000mm) Tapered Tip Forks – Rear Tow Hitch Pin
- Three Section Hydraulic Control Valve
- Meets ANSI B56.1
